Cut out exhaust sound
Hem / Mobilitet (Bil, Cykel, Kollektivtrafik) / Cut out exhaust sound
This level of control is not possible with a standard exhaust system, which generally has a fixed noise level.
Another significant difference is the potential for performance enhancements with exhaust cutouts. By reducing back pressure and allowing for a more efficient exhaust flow, the engine can operate more efficiently, potentially resulting in better fuel economy.
By opening the cutout, exhaust gases can exit the vehicle more freely, reducing back pressure in the exhaust system. But that’s not all – there’s more to know about exhaust cutouts, so let’s dig in!
Definition of Exhaust Cutout
Basic Description
An exhaust cutout is a mechanical device that allows for the bypass or alteration of the exhaust flow in a vehicle’s exhaust system.
Our stores install automotive computer tuners. During normal operation, gases pass through the entire exhaust system, which reduces noise and improves emission control. They are especially popular among performance enthusiasts as they can be integrated into the existing vacuum system of the vehicle.
Design and Construction of Exhaust Cutouts
Materials Used
Exhaust cutouts are typically made of durable materials that can withstand the high temperatures and corrosive nature of exhaust gases.
This can result in improved engine efficiency, increased horsepower, and enhanced throttle response.
suspension kits, lowering and lifting. tonneau covers. At FMS Performance we believe that using the the right tools for header Installation starts with the right installer.
Our technicians have been professionally educated and have completed industry degrees from accredited schools. These cutouts use a vacuum actuator that opens or closes the cutout based on the engine’s vacuum level.
Let us be the class 101 for your automotive learning.
| Ford | General Motors GM | Pontiac | Jaguar | Land Rover | Nissan |
| Toyota | Honda | Lexus | Acura | Lotus | Scion |
| Infinity | BMW | Mercedes | Mitsubishi | Ferrari | Maserati |
| Lamborghini | Volks Wagen VW | Saab | Audi | Hyundai | Kia |
| Subaru | Mazda | Chevy | Volvo | Caddilac | Dodge |
| Chrylser | Daewoo | Porsche | Mercury | Freightliner | MG |
Individual Models
| Ford Mustang | Mitsubishi Eclipse | Mitsubishi Evo | Subaru WRX / STI | Dodge Viper | Chevrolet Corvette |
| Nissan Skyline | Honda S2000 | Nissan 350z | Toyota Supra | Chevy Camaro | Lotus Elise Exige |
| Honda Civic | VW Golf | Dodge SRT-4 | Eagle Talon | Acura Integra | BMW M3 |
| Nissan 240sx | Porsche 911 | Acura NSX | Honda Accord | Toyota Camry | Toyota MR2 |
| VW R32 | Dodge Truck | Mazda Rx7 | VW Jetta | Sand Buggy | Nissan Sentra |
On the other hand, some potential cons include increased maintenance requirements, the possibility of excessive noise, and the need to navigate local regulations regarding exhaust noise levels. Stainless steel is often preferred due to its high resistance to heat and corrosion, making it ideal for prolonged exposure to exhaust gases.
Design Specifications
The design of an exhaust cutout can vary depending on the specific manufacturer and the intended application.
In the early days, cutouts were often simple butterfly valves installed in the exhaust pipe. This led to the development of rudimentary cutout devices that allowed drivers to bypass the muffler and achieve a louder exhaust note.
Development over Time
Over the years, exhaust cutouts have evolved and become more sophisticated.
They are usually designed to fit in-line with the vehicle’s exhaust system, seamlessly integrating into the existing piping. In the early 20th century, car enthusiasts and racers began experimenting with ways to modify their vehicles’ exhaust systems to improve performance and produce a more distinctive sound.